Parkeerbruggen Parkbühnen Parkinglifts
Parkeersystemen Parksystemen Parkingsystems
Intern bv . Overveld 19, 3848 BT Harderwijk. The Netherlands .00-31-341-430114 info@internbv.nl
int-TPP-1132
Multi-Parker
3200 kg Lifting capacity, 220 Volt/1ph, Hydraulic.
Whether you own a public parking lot, parking garage or you want to optimize
your private parking. The int-TPP-1132 in all cases, an ideal solution.
Space saving, very economical priced and infinitely linkable by making use of
the same columns , the lifts will be linked to each other creates a double row
of parking spaces. Throughout the site of the columns and the high free space
below the platforms it is very simple to drive a car on the platform, to step out.
And lift the int-tpp-1132 up so that another extra parking space under the
platform arises, where simple and spacious, can be parked
The int-TPP-1132 can be used both indoors and outdoors, as an option you can
order the lift in a galvanized version By default, the bridge is powdercoated as
protection against moisture and dirt.
It can be ordered as
220 Volt / 1ph or as
400 Volt / 3ph model
With motorunit and
control boxes on the
column or as a unit
on the ground behind
Full automatic locking on
every 10 cm, so a safe
longtime parking is
secured .
telescopic hydraulic
cylinders, which can have
a of weight 3200 kg per
lift forstable and
synchronous lifting.
Using the synchronization
chain, synchronous lifting
the platform steady is
always guaranteed.
Platform "wave board" for
easy mounting and
prevents leaking any oil
or dirt on the car below
The electric eye stops
the lift directly in case of
any obstacles under the
lift and detections if there
is a car under the lift.
Adjustable endswitch
for safe lifting just below
the ceiling.
Based on the table above, you can calculate how much space take by the
necessary lifts and what the purchase costs will be .In example shown five
lifts. This is only as an example, there can also be 2 or 10 coupled to each
other.
Full automatic locking
device
All control boxes and
units can be on column
Easy handling with
keyswitch
Due to the very low sweep of the
platform, it is also a good drive on
height for very low (sports) cars.
The high lift gives a broad Free
drive-through of 2.10 mtr .
to walk without bending.
To make the lifts linking one uses the optimal space to maximize your possible
parkingplace .With the capacity of 3200 g and free passage height of 2.10
meters, the int-tpp-1132 s one of the most widely suitable lift for the larger and
heavier cars.
Even in places with certain dimensions due to supporting walls and pillars,
the int-tpp-1132's are always placed so that a space is used optimally.
lift capacity
3200 kg
color
RAL7011 (or on request)
current
220volt, 1ph or 400 volt, 3 ph
working
electric/hydraulic
Watch the video
ask for offer
Dimensions
A post height
3010 mm
max.cilinders out
3455 mm
B-overall width
2555 mm
C-platform height
3955 mm
D-foot length
in front of column
1070 mm
behind column
470 mm
E-drive-through width
2172 mm
F Free drive-through height
2100 mm
G-Platform width
2100 mm
drive-on height
120 mm
CE
.
Specifications
Prices
All prices are excl.VAT
€ 3.500,=
Start model
€ 250,=
Transport
€ 750,=
installation
€ 3.500,= +€ 3.500,= +€ 3.500,= +€ 3.500,= +€ 3.500,=
12090 mm
9705 mm
7320 mm
4935 mm
2550 mm